A)
-
Wind the thread in touching turns to the bend of the hook
and then back along 955 of the shank of the hook toward the eye.
-
Tie a clump of marabou in on top of the hook shank with
the tips extending over the top of the hook and behind the hook a
distance equal to the length of the hook shank.
|
|
B)
- Take the thread back down to the bend of the hook binding
the marabou to the shank of the hook as you go.
- Form a dubbing loop at the bend of the hook and return the
thread back toward the eye of the hook to the 95% mark.
 |
|
C)
-
Select a length of cross cut Zonker and careful place it
lengthwise between the dubbing loop.
|
|
D)
-
Cut the leather of the Zonker strip and twist the end of
the dubbing loop so that the thread locks the Zonker dubbing into a
twisted rope.
|
|
E)
-
Wind the dubbing rope forward to the eye of the hook in
touching turns stroking the fibres back toward the tail as you proceed.
-
Build up a neat head, whip finish and varnish.
|
|
